Work Location

Onshore/Offshore, SPDC Escravos, Otumara West Asset, Nigeria

Reports To

Production Unit Manager

Academics

B.ENG (HONS)/B.SC/HND in Electrical & Electronic Engineering/ Communications/Computer Engineering or Sciences. Masters/PhD is an added advantage

Age

Academics

Minimum Requirement - OND or Equivalent

Start Date

01/03/24

Work Experience
 

4-10 years HANDS-ON experience in Diesel and Gas Caterpillar Engines/Gen Sets (G3412, G3408,D3512, G3516, G3512, D3304), Sulzer Pumps, Waukesha VHP Engines(L5790GSIU), Cameron/Howden and Siemens compressors, Solar Turbines(Mars 100, Taurus 60, centaur 40) with demonstrated excellent skills in... Technical Reports writing.
Familiarity or experience in SPDC assets in NorthBank Node shall be considered added advantage

Technology / Equipment Competences

Skilled at Caterpillar gas/diesel engines troubleshooting and repair (G3412, G3408, D3512, G3516, G3512),
Skilled at Sulzer pump troubleshooting and repair
Skilled at Waukesha Gas Engine troubleshooting and repair
Skilled at use of Caterpillar diagnostic tools (ET)
Skilled at overhaul of Engine Accessories, Engine Clutches, Cylinder heads, Air starter motors and engine cooling systems (radiator and water pump)
Knowledge at carrying out 4K and 8K inspection of Solar Turbines, Siemens/Waukesha Compressors (Inspection and repair/re-kit of suction and discharge valves)
Skilled at Technical report writing

Professional Certifications

Gas & Diesel Engine Training / certification (would be considered added advantage)
PTW competent (would be considered added advantage)

Technical Skills (Added advantage)

Ability to demonstrate in-depth discipline expertise to the operation and maintenance of rotating equipment in remote locations.
Ability to review and analyze all equipment failure pattern.
Ability to trends failure pattern and offer paramount solutions.
Ability to work on engines (diesel & gas) and pumps without supervision.
Ability to lead and manage technical crew for field callouts.
To support other Teams for intervention activities in utility power sub-stations and locations
Ability to carry out troubleshooting on diesel / gas engines and pumps.
Ability to carry put repair works on caterpillar engine accessories (starter motor, butterfly assembly, diesel/gas engine fuel systems, emergency shutdown switches etc.)
Ability to carry out preventive and corrective maintenance on rotating equipment (Caterpillar and Waukesha Engines, Sulzer pumps, Cameron Compressors compressors)
Ability to execute routine FLM (First Line Maintenance) checks on running equipment.
Ability to work in instrument air compressors, and emergency fire pumps.
Ability to use / operate power and hand tools and machinery to perform various inspections, repairs and analysis on equipment.
Ability to use diagnostic tools during overhaul and troubleshooting (ET,)
Ability to provide technical support to contractor, analyzing, identifying mechanical potential problems.
Experience in Oil and AGG facilities operations

Work Cycle

The work location is Swamp-field based accessible via the Helicopter.
The job activity period is daily on 12-hour (7am to7pm) routine over a 21-day period.
The successful candidate will manage own absences with his supervisor/contractor for suitable qualified covers.
There may be need for periodic visits to Shell industrial area for trainings and official assignments.  
Personnel may be required to work extended hours as need may arises. more

Work Location

Tunu

Reports To

Production Unit Manager

Academics

University degree/Higher National Diploma in any Discipline

Age

Academics

OND/HND/University Degree.

Start Date

1st March 2024.

Skills (Added advantage)

Must have at least five (7) years’ experience working as ascheduler/Plannerin SPDC.Excellent understanding of the end-to-end supply chain and the integration points along it Specific experience in Material Management specifically in the planning and delivering excellent customerservice.

Good... planning skilling with the ability to identify and mitigate issues before theymaterialize

Good IT skills including good understanding of an ERP system and competent with using spreadsheets

Good analytical Skills

Good team player with excellent interpersonal skills, able tocommunicate and engage various levels in the organization.

Soft Skills

 Skill level competency in the use of Microsoft office suites.
 Skill levelKnowledgein theuse of SAP tool
 Knowledge of worksite hazardmanagement
 Ability to multitaskeffectively.
 GoodCommunicationskills&ateamplayer.
 Ability to work under pressure with resilience.
 Good organizational skills
 Flexibility and adaptability.
 Self-Motivated and performs under minimal supervision.

Technical / Leadership Skills

TheSchedulingSupportwill be responsible for the following:
Plan the short-term outbound deliveries from Supply bases and warehouses to ensure thatmaterial availability is above 95% for stocked line items and that direct charge materials areefficiently delivered to site
Plan the outbound deliveries for AGO from major storage sites to the assets to ensureendurance ismaintained to the optimal level
Work closely with the Integrated Logistics Scheduling team, Land Logistics and Logisticscoordinators to ensure right material is delivered safely to the right asset atthe right time.
Identify opportunities to improve the outbound process, through optimal scheduling, timingand transport utilization, such as the extension of the Milk Run philosophy
Be the first point of contact for the exception process of emergency material withdrawals fromthe supply base warehouses and manage this process end to end ensuring the material is
delivered as fast as possible.Fullunderstanding of the TAM/Shutdown and IAP plan to ensure uncompromised execution

Work Cycle

The work location is in North Bank Node and is accessible via land and Air.
The job activity period is daily on 12-hour (7am to7pm) routine over a 21-day period.
There is a standard 3weeks on and 3weeks off schedule.
The successful candidate will manage own absences with his/her contractor for suitable qualified covers.
There may be need for periodic visits to Shell industrial area for trainings and official assignments.
Personnel may be required to work extended hours as need may arises. more

Academics

SSCE or Equivalent Minumum

Start Date

1st March 2024

Work Experience


Minimum of 5 years as Instrumentation Technician in Oil and Gas industry with experience in Crude oil separation and Gas dehydration.


Experience in SPDC gas plant and flow station operations (Preferably Northbank Node) is also a strong added advantage.


Skills

Experience in troubleshooting... and maintaining instrumentation system on Delta V DCS (Emerson) systems.
Experience in troubleshooting and maintaining instrumentation systems on Twister gas dehydration technology.
Experience in troubleshooting and maintaining instrumentation systems on Solar Turbines (Taurus 60, Centaur 40, and Mars 100) and Engines (Waukesha, Caterpillar etc)
Experience in troubleshooting and maintaining instrumentation systems on Cameron/Howden/Siemens compressors.
Experience in various process control valves and ESD valves systems maintenance
Experience in Fire and Gas detection (Honeywell point and open path gas detectors, smoke detectors, Spectrex flame detectors etc) and suppression system maintenance (Turbine enclosure CO2 suppression system)
Excellent analytical and problem-solving skills.
Alarm management and rationalization experience.
Experience in Safeguarding systems maintenance
Experience in Oil, NAG and AG facilities operations

Soft Skills (Added advantage)

Perform basic computer related activities.
Knowledge of worksite hazard mgt and permit to work systems.
Ability to multi-task effectively
Communication & teamworking.
Ability to work under pressure.
Good organizational skills
Flexibility and adaptability.
Self-Motivated and performs under minimal supervision.

Roles and Responsibilities

Ensure performance assurance and proactive health checks of the associated components of the PAS, SIS and Fire & Gas Systems (Point Gas Detector).
Ensure periodic health checks on Human Machine Interface workstations and Servers. Systems fault diagnosis and recovery.
Access and interpret Process and Instrumentation Diagrams (P&ID); Cause and Effects Matrix (C&E); Process Flow Scheme (PFS); Functional Logic Diagram (FLD); Instrument Loop Drawings (ILD) and Process Engineering Flow Scheme (PEFS) required for fault tracing and issues resolutions.
Work closely with service Contractor(s) towards safe delivery of vendor-based maintenance jobs.
Initiate and follow up with spares procurement towards expedited delivery for maintenance execution.
Ensure technical integrity of assets through Preventive and Corrective Maintenance activities, quality assurance and performance standard verification of safety critical equipment
Technically support Operations personnel towards plant safe operations.
Ensure field instrumentation availability and reliability towards meeting business targets on hydrocarbon processing and export operations.
Maintain Systems availability for the continuous operation of the Flow station and AGG facilities
Identifying critical spares and follow-up ordering and delivery.
Integrate with other disciplines to achieve Asset integrity on continuous basis.
Promotes site safety and continuous hazard identification, mitigation and close-out.
Other assignments for continuous improvements as exigent.

Work Cycle

The work location is Swamp-field based accessible via the Helicopter and Boat.
The job activity period is daily on 12-hour (7am to7pm) routine over a 21-day period.
There is a standard 3weeks on and 3weeks off schedule.
The successful candidate will manage own absences with his/her contractor for suitable qualified covers.
There may be need for periodic visits to Shell industrial area for trainings and official assignments.
Personnel may be required to work extended hours as need may arises. more

Academics

Minimum School Certificate (WAEC) or Equivalent

Start Date

01/03/24

Work Experience
 

4-10 years HANDS-ON experience in Diesel and Gas Caterpillar Engines/Gen Sets (G3412, G3408,D3512, G3516, G3512, D3304), Sulzer Pumps, Waukesha VHP Engines(L5790GSIU), Cameron/Howden and Siemens compressors, Solar Turbines(Mars 100, Taurus 60, centaur 40) with demonstrated excellent... skills in Technical Reports writing.
Familiarity or experience in SPDC assets in Tunu Node shall be considered added advantage

 
Technology / Equipment Competences.
 

Skilled at Caterpillar gas/diesel engines troubleshooting and repair (G3412, G3408, D3512, G3516, G3512),
Skilled at Sulzer pump troubleshooting and repair
Skilled at Waukesha Gas Engine troubleshooting and repair
Skilled at use of Caterpillar diagnostic tools (ET)
Skilled at overhaul of Engine Accessories, Engine Clutches, Cylinder heads, Air starter motors and engine cooling systems (radiator and water pump)
Knowledge at carrying out 4K and 8K inspection of Solar Turbines, Siemens/Waukesha Compressors (Inspection and repair/re-kit of suction and discharge valves)
Skilled at Technical report writing

Professional Certifications

Gas & Diesel Engine Training / certification (would be considered added advantage)
PTW competent (would be considered added advantage).

Technical Skills (Added advantage)

Ability to demonstrate in-depth discipline expertise to the operation and maintenance of rotating equipment in remote locations
Ability to review and analyze all equipment failure pattern
Ability to trends failure pattern and offer paramount solutions.
Ability to work on engines (diesel & gas) and pumps without supervision
Ability to lead and manage technical crew for field callouts
To support other Teams for intervention activities in utility power sub-stations and locations
Ability to carry out troubleshooting on diesel / gas engines and pumps
Ability to carry put repair works on caterpillar engine accessories (starter motor, butterfly assembly, diesel/gas engine fuel systems, emergency shutdown switches etc.)
Ability to carry out preventive and corrective maintenance on rotating equipment (Caterpillar and Waukesha Engines, Sulzer pumps, Cameron Compressors compressors)
Ability to execute routine FLM (First Line Maintenance) checks on running equipment
Ability to work in instrument air compressors, and emergency fire pumps
Ability to use / operate power and hand tools and machinery to perform various inspections, repairs and analysis on equipment
Ability to use diagnostic tools during overhaul and troubleshooting (ET,)
Ability to provide technical support to contractor, analyzing, identifying mechanical potential problems.
Experience in Oil and AGG facilities operations

Work Cycle

The work location is Swamp-field based accessible via the Helicopter.
The job activity period is daily on 12-hour (7am to7pm) routine over a 21-day period.
The successful candidate will manage own absences with his supervisor/contractor for suitable qualified covers.
There may be need for periodic visits to Shell industrial area for trainings and official assignments.  
Personnel may be required to work extended hours as need may arises. more

Academics

B.SC in Marketing.

Age

Academics

Minimum of WAEC qualification

Age

Academics

Bachelors/HND/OND/IVQ LEVEL 5 or equivalent in any science or engineering discipline.

Age

Academics

WAEC or Equivalent (Minimum)

Age

Not more 60yrs

Start Date

1st March 2024

Key Skills & Experiences

3 to 8yrs hands-on experience in CRO/field production operations in a reputable oil and gas company.
Ability to work with a multi-discipline production team.
Basic understanding of Process Flow Diagram.
Good working knowledge of PTW system, AMS and HSE procedures e.g... 9 LSR/IOGP, PSF & 3 Golden Rules
Experience in SPDC gas plant and flow station operations (Preferably Northbank Node) is also a strong added advantage.

Skills (added advantage)

Facility safety enforcement including Risk identification/mitigation, work crew communication and buddy system
knowledge in safe work practices and use of SOPs, MOPO and IOGs
Flowstation and Gas plant operations including Well testing, Crude sampling, pressures monitoring, daily FLM, APM, OPS -WIT, Facility start-up, stabilization, monitoring, controlling and shutdown.
Deep knowledge of wellhead systems (installation/retrieval of modified COM-unit, CCU, completion and testing/troubleshooting of various components and accessories)
Experience in operations of field Control and safeguarding systems (pneumatic, hydraulic, and electronic) including sensors, transmitters, actuators, and valves.
Knowledge in fluid dynamics and mechanics.
Knowledge of hydrocarbon fluid flow, compression, and transfer to export
Competent to Work in AGG plant within Northbank node fields
Ability to interface with other outstations in Northbank node is an added advantage.
Good knowledge of chemical storage and management e.g Phasetreat, Corrosion inhibitors, Biocide, MEG with use of SHOC cards.
Basic knowledge of gas dehydration system specifically Twister system.
Ability to use Emerson delta-V DCS to manage monitoring and reporting of abnormal flowline pressures for security team quick intervention to prevent wellhead/flowline vandalization within Northbank node is an added advantage.
Leadership skills
PTW and UTL competence

Soft Skills

Strong Communication & interpersonal relationship skills.
Proficiency in Onsite risk management.
Proficiency in the use of MS Tools.

Roles and Responsibilities
Operator of flow station, gas stations and associated assets in a safe and efficient manner in compliance with stipulated guidelines.

Coach, Develop and Lead a team of Technicians in Field operations.
Manage day-to-day production operations field activities and manage safety and environmental issues.
Monitor, control and record production rates and performance.
Assess Risk of daily Jobs and Escalate, when necessary, to Team Leaders
Start-up wells and facilities (hot and cold start).
Perform basic troubleshooting on wells and facilities to ensure stability.
Prepare the wells and facilities/equipment for (re) commencement of production/processing.
Perform routine well test, bean/choke changeout and sampling of producing wells.
Measure, validate and report production volumes accurately
Carryout ad-hoc annulus pressure monitoring of all wells in the production unit.
Perform periodic well integrity assurance tasks and activities (both well's flow-wetted and non-flow-wetted components)
Perform daily first line monitoring of process parameters and variables.
Gather daily production data, determine the production performance.
Ensure optimized chemical injection rates are followed as advised.
Observe local instruments, gauges, and meters to verify conformance to standard operating practice.
Responsible for preparing equipment for maintenance including isolation, draining, steaming, and other procedures as required.
Execute routine production and maintenance operations and minor non-routine production and Maintenance activities as directed by his Team Leader
Responsible for preparation such as plant isolation etc., for day-to-day maintenance work.
Perform daily check and minor maintenance based on the check list etc.
Collaborate with the maintenance team on assigned tasks and activities.
Take requested samples for analyses, take and record field data requested for general monitoring of plant performance
Participate in monthly HSSE-SP meeting and daily toolbox meeting
Maximize use of DCS to safely operate process plant.
Carry out Inlet manifold pressure checks
Remote line up of process equipment – both Flow station and Booster stations
Support Collation of production/ flare daily report data from the DCS
Carry out reset and safe startup operations using the DCS
Raise UA/UC
Manage HSE performance and deliveries of the Team.
Participate in vessel de-sanding activities.
Saver pit operation to prevent oil carry over.
Emergency response to prevent oil spill escalation.
Receive AGO and chemical into storage, manage accordingly with proper tracking.
Follow-up and update materials inventory in the store.

Work Cycle

The work location is Swamp-field based accessible via the Helicopter or Boat.
The job activity period is daily on 12-hour (7am to 7pm) routine over a 21-day period.
The successful candidate will manage own absences with his/her contractor for suitable qualified covers.
There may be need for periodic visits to Shell industrial area for trainings and official assignments. more